Honda 1992 Accord Wagon Owner'S Manual Download Page 7

Page: 7 / 166

Keys and Locks (cont'd)

Door Plunger

From inside the car, each door and the tailgate can be locked by
pushing the plunger down; each door can be unlocked by pulling the
plunger up.

Pushing down the plunger on the driver's door locks all doors and the

tailgate, but pulling up the plunger unlocks only the driver's door.

Pushing down on the tailgate plunger locks the tailgate and all doors.

The plunger on the tailgate is not designed to be pulled up manually

for unlocking.

Power Door Locks

All doors and the tailgate can be simultaneously locked and unlocked

by operating the master door lock switch on the inside of each front
door.

Unlock

Lock

Unlock

Lock

Summary of Contents for 1992 Accord Wagon







































































































































































Search results

Summary of Contents for 1992 Accord Wagon

Reviews:

Related manuals for 1992 Accord Wagon

Brands by name

Popular brands

Honda 1992 Accord Wagon, Owner'S Manual

Search results

Summary of Contents for 1992 Accord Wagon

Reviews:

Related manuals for 1992 Accord Wagon

Brands by name

Popular brands