Stereo Sound System (cont'd)
The TMS function lets you skip to the beginning of a song or other
recorded passage. The tape skips forward or backward, depending on
which direction your push the FF/REW/TMS switch. Activate TMS by
pushing the switch and holding it until you hear a beep. If you push
the switch up "FF" blinks in the display as the tape fast forwards. If
you push the switch down, "REW" blinks in the display as the tape
rewinds. When the system senses a silent gap on the tape it goes back
to the PLAY mode.
The TMS function may not work properly under the following
conditions:
Tapes which contain conversation, lectures, etc.
Classical music tapes or tapes that have many silent or mute
passages.
Tapes which have a short time interval between recorded
programs.
Tapes with a high level of noise or hum between programs.
If you do not need the TMS function, push the TMS switch. The
indicator light will go off, and the circuit will not operate.
Fast Forward/Rewind (US: LX, Canada: EX)
Note which Tape Direction Indicator is displayed or Then
push the appropriate button, fast forward (FF) or rewind (REW), to
rapidly wind the tape in play. To stop FF or REW, push the PLAY
button.
Play (US: LX, Canada: EX)
Push to resume tape play or to stop the FF or REW operation.
Repeat Button (REPEAT)
Push the REPEAT button (indicator on) to return to the beginning of
a song or section of programming and repeat its play. Push the button
again (indicator off) to cancel the repeat function and resume normal
play.
Summary of Contents for 1992 Accord Wagon
Page 109: ...Maintenance Schedule cont d...
Page 151: ...Specifications cont d page 105...