Honda 1992 Accord Wagon Owner'S Manual Download Page 147

Page: 147 / 166

Jump Starting (cont'd)

3. Use the other cable to connect the negative terminal of the booster

battery to the engine at the ground cable as shown.

4. To remove the cables, reverse the above procedures exactly.

DO NOT push or tow a car to start it. The forward surge

when the engine starts could cause a collision. Also, under some

conditions, the catalytic converter could be damaged. A car
equipped with an automatic transmission cannot be started by

pushing or towing.

NOTE:
( US: EX, Canada: EX-R)

After jump-starting the car, there is a possibility that the ABS

warning light may come on due to insufficient battery voltage. After
the battery is sufficiently recharged and the engine is turned off and

restarted, the ABS warning light should indicate that the ABS is OK

by coming on for a few seconds each time the engine is started. If the
light remains on after recharging, have it checked by a Honda dealer.

Summary of Contents for 1992 Accord Wagon







































































































































































Search results

Summary of Contents for 1992 Accord Wagon

Reviews:

Related manuals for 1992 Accord Wagon

Brands by name

Popular brands

Honda 1992 Accord Wagon, Owner'S Manual

Search results

Summary of Contents for 1992 Accord Wagon

Reviews:

Related manuals for 1992 Accord Wagon

Brands by name

Popular brands