Changing a Flat Tire
Do not attempt to change a tire unless the car is on
firm, level ground and well out of the flow of traffic.
Park the car on a firm, level surface, apply the parking brake, turn
on the hazard warning switch, turn the ignition off, put the
transmission in gear (Park for automatic transmission) and turn the
ignition off.
1. Lift the floor panel in
the cargo area.
2. Remove the jack.
NOTE: Turn the
connector on the end of the
jack counterclockwise to
loosen it from its mount.
3. Remove the lug wrench/jack handle and jack handle extension
from the tool bag.
4. Remove the spare tire.
5. Place blocks (not provided with the car) in front of and in back of
the wheel diagonally opposite the tire you are changing.
6. Use the lug wrench to loosen the wheel lug nuts counterclockwise
one-half turn.
—
On the EX and EX-R models: First remove the center cap from
the wheel by prying it out with a flat screwdriver (not provided
in the tool bag), or coin.
CAUTION:Hold the center cap with your hand then pry it
off using a cloth to protect the cap and the wheel.
SPARE
TIRE
JACK
TOOL
BAG
SCREWDRIVER
CENTER CAP
CLOTH
Summary of Contents for 1992 Accord Wagon
Page 109: ...Maintenance Schedule cont d...
Page 151: ...Specifications cont d page 105...
