4.1 Tank Operation
Operation
Maintain
4.1 Clean dust box and filter
Remove dust box and clean.
Open the dust box lock and remove any dust and dirt.
Remove the filter, do not clear HEPA with waterand simplypat it softly to clean dust.
Wash the dust box and the primary filter and dry the dust box and filter,
*Please turn off the charging dock when clean the machine and accessories.
This machine is equipped with tank. After clean the floor, and need to mop the floor, Please
charge the dust boz and tank. The way to clean, Please refer to user manual (maintain) chapter.
*During mopping, if the vacuum stops working then please add more water or clean the water
see page rag and restart the machine.
*Please do not mop on the carpet.
*Please remove the tank when charging the machine.
Stick the water seepage rag
1
2
Add water
Fix both sides of the water seepage rag along the lower
end of the holder and insert the water seepage rag.
Install the holder with water seepage rag to the bottom
of the host, attath to the bottom of the host.
Open the injector rubber plug, add the water slowly,
when added fully, cover the rubber plug.
3
Installed the tank
4
Mop floor
Open the cover of machine and replace the dust box
with the tank.
Start any mode of clean and the machine will do both
clean and mop.
Product Information
Product Information
Smart Living
Smart Living
17
18
