Holtkamp Electronics DUO XXL techn.stand 01.2018 4022_01.2018/V05.2020
- 30 -
16.2.1 Select weekday
The seven weekday sub menus are all the same, so they are
described as examples on the weekday „
Monday
”.
If you want to use the same shifting times for Monday, such as
apply to Friday, so you have to set „
Friday
” here. Then no further
settings need to be made for Monday.
It is essential to set the shifting times and tariffs of the other day
(in this case Friday).
If individual settings are made for Monday then „---“ should be
set here.
Number of shifting times and tariffs (max. 8).
Should e.g. at 5 different times of the day 5 different tariffs (main
times and/or prices) apply, „5” is set here. Then 5 shifting times
A, B, C, D and E and also 5 tariffs A, B, C, D and E can be set in
the next menu items.
In this case, 5 shifting times are set with 5 associated rates:
●
from 6:30 am to 10:00 am the price is 1 and/or the main
time 1
●
from 10:00 am to 4:00 pm the price is 2 and/or the main
time 2
●
from 4:00 pm to 8:00 pm the price is 3 and/or the main
time 3
●
from 8:00 pm to 10:00 pm the price is 2 and/or the main
time 2
●
from 10:00 pm to 6:30 am the next day it is not possible to
buy time but it is possible to revalue a chip card.
The shifting times can be programmed in any order, but an
ascending order is strongly recommended for clarity: Shift time A
should be smaller than shift time B, shift time B should be smaller
than shift time C etc.
Whether only the price or only the main time or both are swit-
ched is set in the menu point „
Payment method
”. The associated
prices and/or main times are to be set in the menu „
Times and
Prices
”.
Exception: If the menu point „
Happy hour steps
” is subsequently
set to a lower value in the menu „
Configuration/Payment
”, it may
happen that a tariff set above has too large and therefore invalid
value. In this case the tariff will be corrected to „1”!
