background image

Holtkamp Electronics DUO XXL                                    techn.stand 01.2018                                               4022_01.2018/V05.2020

- 32 -

With these 5 menu items, the other 5 buttons are configured on 

the revaluating-screen. If an amount is set to „0”, the correspon

-

ding button is invisible.

With revaluating by service chip card type 73, bonuses can be 

awarded. 

These are additional amounts of money which are additionally 

revalued to the customers chip card (without paying for them). 

In this case are 2 bonus steps with 2 corresponding bonus 

amounts set: 

The customer pays 10€ and gets 1€ bonus. So the chip card will 

be revalued with 11 € (=10 €+1 €). 

If the customer pays 20 € he gets 2 € bonus and 23 € will be 

revalued (=20 €+1 €+2 €). 

The bonus steps must be programmed in ascending 

order: Step 1 must be smaller (or same) as step 2, 

step 2 must be smaller or same as step 3 etc. The 

complete bonus amounts will be upgraded. 

The bonuses can be awarded several times by chip card 

removal and plugging in again!

 

 

 

 

 

 

Tamper trouble: 

First  delete  the  chip  card,  then  revalue  the 

same amount ==> bonus can be obtained by devious means. To 

prove this, there is a counter for deleted amounts in the statistics 

menu. Furthermore the delete function can be switched off. The 

bonus allocation can also be switched off. The staff has to docu

-

ment every revalue and devalue.

17.4  Chip card revalue via cash insertion

Here the customer operated chip card is released and configured 

by cash insertion  (for chip card type 11). Their exact function is 

described in the menu „

Card editing and revalue

”. 

Description of the above 2 menu items:

Revaluating by cash” set to „yes“

Free the revalue

„Max. card balance to be revaluated by cash“:

  Defines  a 

maximum chip card balance for the revaluating (can be slightly 

exceeded by the bonuses).

The amount is limited by the „Maximum allowed card 

balance”,  see  chapter  „Configuration/div.  operating 

parameters“! Because of the possible bonuses he 

should be set a bit smaller. 

Summary of Contents for DUO XXL





































































Reviews: