manualshive.com logo in svg

Holtek HT85F2260, Manual, Page: 16 / 225

Share
Download
Holtek HT85F2260 Manual Download Page 16

Rev. 1.00 

16 of ���

�an�a�� 1�� �01�

Standard 8051 8-Bit Flash MCU

HT85F2260/HT85F2270/HT85F2280

General Description 

2  

General Description 

The HT85F22x0 series of devices are Flash Memory A/D type high performance 1-T architecture 

8051-Based microcontrollers. Offering users the convenience of Flash Memory multi-programming 

features, these devices also include a wide range of functions and features. 

Analog features include a multi-channel 12-bit A/D converter, a 12-bit D/A converter and dual 

comparator functions. Multiple timers provide timing, capture, event counter and programmable 

clock output functions. Communication with the outside world is catered for by including fully 

integrated SPI, I

2

C and UART interface functions, popular interfaces which provide designers 

with a means of easy communication with external peripheral hardware. Protective features such 

as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector and excellent noise 

immunity and ESD protection ensure that reliable operation is maintained in hostile electrical 

environments.

A full choice of both internal and external high and low speed oscillators are provided with the 

internal oscillators requiring no external components for its implementation. A fully internal Phase 

Locked Loop and the ability to operate and switch dynamically between a range of operating 

modes using different clock sources gives users the ability to optimise microcontroller operation 

and minimize power consumption.

The inclusion of flexible I/O programming features, Time-Base functions along with many other 

features ensure that the device will find excellent use in applications such as electronic metering, 

environmental monitoring, handheld instruments, household appliances, electronically controlled 

tools, motor driving in addition to many others.

The HT85F22x0 series are Flash devices offering the advantages of easy and effective in-circuit 

program updates. In addition, an EV chip, HT85V2280, includes an OCDS (On-Chip Debug 

Support) interface for the In-Circuit Emulator.  

Summary of Contents for HT85F2260


































































































































































































































Reviews:

No comments