Holtek HT46R22 Handbook Download Page 131 | Manualshive

Page: 131 / 162

background image

Some of the special features provided by the HT-IDE3000 include:

®

Emulation

·

Real-time program instruction emulation

®

Hardware

·

Easy installation and usage

·

Either internal or external oscillator

·

Breakpoint mechanism

·

Trace functions and trigger qualification supported by trace emulation chip

·

Printer port for connecting the HT-ICE to a host computer

·

I/O interface card for connecting the user

¢

s application board to the HT-ICE

·

OTP writer hardware integrated within the HT-ICE

®

Software

·

Windows based software utilities

·

Source program level debugger (symbolic debugger)

·

Workbench for multiple source program files (more than one source program file in one
application project)

·

All tools are included for the development, debug, evaluation and generation of the final
application program code (mask ROM file)

·

Library for the setting up of common procedures which can be linked at a later date to other
projects.

·

Simulator can simulate and debug programs without connection to the HT-ICE hardware

·

Virtual Peripheral Manager (VPM) simulates the behavior of the peripheral devices.

·

LCD simulator simulates the behavior of the LCD panel.

Holtek In-Circuit Emulator

-

HT-ICE

Developed alongside the Holtek 8-bit microcontroller device range, the Holtek ICE is a fully func-

tional in-circuit emulator for Holtek

¢

s 8-bit microcontroller devices. Incorporated within the system

are a comprehensive set of hardware and software tools for rapid and easy development of user
applications. Central to the system is the in-circuit hardware emulator, capable of emulating all of

Holtek

¢

s 8-bit devices in real-time, while also providing a range of powerful debugging and trace fa-

cilities. Regarding software functions, the system incorporates a user-friendly Windows based
workbench which integrates together functions such as program editor, Cross Assembler, Cross
Linker and library manager. In addition, the system is capable of running in software simulation
mode without connection to the HT-ICE hardware.

HT-ICE Interface Card

The interface cards supplied with the HT-ICE can be used for most applications, however, it is pos-
sible for the user to omit the supplied interface card and design their own interface card. By includ-
ing the necessary interface circuitry on their own interface card, the user has a means of directly
connecting their target boards to the CN1 and CN2 connectors of the HT-ICE.

122

A/D Type MCU

«
...
129
130
131
132
133
...
»

Summary of Contents for HT46R22



































































































































































Reviews:

No comments

Related manuals for HT46R22

Brand: E-fly Pages: 16

Brand: C.Nord Pages: 100

CoreBuilder 9000

Brand: 3Com Pages: 78

Brand: Aaeon Pages: 76

Brand: GBD Pages: 68

Brand: Gardena Pages: 17

Brand: SAFI Pages: 18

Brand: Badger Meter Pages: 2

Brand: Badger Meter Pages: 48

BadgerTouch HREBT

Brand: Badger Meter Pages: 12

Brand: Badger Meter Pages: 16

VLT AQUA Drive FC 202

Brand: Danfoss Pages: 124

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 8

Brand: Danfoss Pages: 114

ECL Comfort 300

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 16

Brand: Danfoss Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands