Hog Technologies PAINT HOG, Operation Manual

Page: 38 / 87

38 38
Section 2 - Paint Hog Systems
Accessory Circuit Protection
ATC blade type fuses in fuse panels or in-line
fuse holders located inside the front and rear
control panels protect most circuits activated by
the switches. In-line fuses in circuits outside the
panels protect other circuits.
NOTICE:
THE CIRCUITS PROTECTED BY IN-LINE FUSES WILL VARY.
IN-LINE FUSE LOCATIONS WILL ALSO VARY, DEPENDING
ON THE ACCESSORY CIRCUIT PROTECTED. THE MOST
COMMON LOCATIONS FOR IN-LINE FUSES ARE INSIDE
THE CONTROL PANELS OR NEAR THE COMPONENT THEY
PROTECT.
Fuses are color coded with the AMP rating printed
on the body. The fuse body is translucent plastic
making the fuse element clearly visible and easy
to identify a blown fuse.
When replacing fuses, never replace the blown
fuse with a fuse of a different color or higher am -
perage in an attempt to correct a circuit that is
causing the fuse to blow. Using a higher amperage
Cab Main Switch Panel Fuses
Rear Control Console Switch Panel In-Line Fuses
fuse can cause the circuit to overheat which can
damage the circuit and components or cause an
electrical fire.
Contact Hog Technologies Customer Service if
you need assistance troubleshooting an electrical
problem.
Typical Rear Control Console Fuse Panels