Hog Technologies PAINT HOG, Operation Manual

Page: 47 / 87

47 47
Section 2 - Paint Hog Systems
GUN 1 ATOMIZER
A pressure gauge and regulator that monitors
and sets atomizer pressure for spray gun 1 on
the right carriage.
YELLOW PAINT
A pressure gauge and regulator that monitors and
sets air pressure in the yellow paint tank.
BLACK PAINT
A pressure gauge and regulator that monitors and
sets air pressure in the black paint tank.
WATER TANK
A pressure gauge and regulator that monitors and
sets air pressure in the water tank.
MANIFOLD
This gauge monitors pressure in the compressed
air system.
BEADS
A pressure gauge and regulator that monitors and
sets air pressure in the bead tank.
WHITE PAINT
A pressure gauge and regulator that monitors and
sets air pressure in the white paint tank.
NOTICE:
ATOMIZING AIR PRESSURE SHOULD ALWAYS BE SET AT
LEAST 10 PSI ( .7 BAR) ABOVE TO PREVENT SPLATTER
AND DRIP.
Rear Station Mounted Controls
Headset Controller
The knob controls headset volume. Rotate the
knob clockwise to increase volume, rotate the
knob counterclockwise to reduce volume.
ARROW BOARD CONTROLLER (Optional)
Located in the cab or on the rear console. Switches
in the arrow board controller select the type of
arrows displayed, brightness and raise or lower
the board.
Carriage Steering Controls
Steering wheel type controls mounted on each
side of the main console that control the hydraulic
cylinders that move the carriages in and out dur-
ing spray operations. The wheels are activated by
Rear Headset Controller
Carriage Steering Wheel
turning the LEFT STEERING OR RIGHT STEERING
switch on the rear control panel ON. Turn the
wheel outboard to move the carriage out. Turn
the wheel inboard to move the carriage in.
Each steering wheel must be activated by the LEFT
or RIGHT STEERING switches in the rear station
control panel before the wheel will move the se-
lected carriage in or out. Each steering switch
must be OFF to lock the carriage hydraulic
system to prevent them from drifting out
while in travel mode.