Hog Technologies PAINT HOG, Operation Manual

Page: 43 / 87

43 43
Section 2 - Paint Hog Systems
2.17 Rear Control Station
Switches and Panels
Rear Control Console
Power to rear work lights and most features of the
paint system are activated by labeled switches or
control pads on the console. LED lights in each
switch illuminate when the circuit activated by the
switch is ON. Two doors on the front of the panel
provide access to panel components.
All 12 volt main circuits and rear station control
panels are energized by the truck ignition switch
and the POWER MASTER switch in the cab switch
panel. The POWER MASTER switch must be ON
for any switches or features in the rear control
panels to function.
Upper Console Switches And Controls
Most switches that control paint equipment are
located in the upper section of the console. This
section is hinged at the bottom and secured with
Rear Control Station
Note: Some components, switches and regulators shown are optional. Your truck may be different, depending on the options selected.
two bolts. It can be opened to access the fuses
that protect the circuits controlled by the switches
and to service other components. Refer to the 12
Volt Electrical System section for additional infor-
mation on circuit protection and fuses.
NOTICE:
THE REAR CONTROL SWITCH PANELS SHOWN IN THIS
SECTION ARE FOR REFERENCE PURPOSES. THE PANEL
ON YOUR TRUCK MAY BE DIFFERENT, DEPENDING ON THE
OPTIONS SELECTED.
Console Switches
The following is a description of the switches and the
features they control:
LEFT STEERING
Releases the lock that prevents the left carriage
from drifting out when the truck is in travel mode
and activates the carriage steering system.