Hog Technologies PAINT HOG, Operation Manual, Page: 37 / 87

37 37
Section 2 - Paint Hog Systems
Main Circuit Breakers
The heavy duty main circuit breakers are con-
nected directly to battery through relays acti-
vated when the ignition switch and cab control
panel POWER MASTER switch are ON. They supply
electrical power directly to front and rear control
panels. The main battery switch, truck ignition
switch and panel POWER MASTER switch must
be ON to supply power to the main breakers and
paint system. Power to individual main circuits can
be activated or deactivated by turning the main
breaker for the circuit ON or OFF.
The main breakers are labeled A, B, C or D which
indicates the circuits the breaker energizes and
protects. They are equipped with a yellow indi-
cator/reset lever that indicates the status of the
breaker (ON or OFF/TRIPPED) and is used to reset
the breaker if it trips or to turn the breaker and
electrical circuit off.
These are heavy duty circuit breakers that typi-
cally trip only when there is a fault in the system.
If a main breaker trips, you should find and cor -
rect the problem before resetting the breaker.
The breaker is reset by moving the yellow lever
to the ON position.
Each main breaker can be used as a disconnect
switch by manually moving the yellow lever to
the OFF or ON position. Move the lever to the ON
position to activate the electrical circuit. Move
the yellow lever to OFF position to deactivate the
circuit.
The following is a description of the main
breakers and the circuits they protect:
Circuit Breaker A
A 70 amp breaker that protects and supplies 12
volt electrical power to the front control panel in
the cab.
Circuit Breakers B & C
70 amp breakers that protect and supply 12 volt
electrical power to the control console on the rear
control station.
Circuit Breaker D (Optional)
A 70 amp breaker that also protects and supplies
12 volt electrical power to the paint heater and
antifreeze circulation pumps.
Main Circuit Breakers
Note: Breaker D is for the optional paint heater system and is
not present on all trucks.
Main Breaker C
Reset Lever In ON Position
B
C
D
A
NOTICE:
THE MAIN BATTERY SWITCH AND TRUCK IGNITION SWITCH
MUST BE ON TO SUPPLY ELECTRICAL POWER TO THE MAIN
CIRCUIT BREAKERS WITH THE POWER MASTER SWITCH.
ALWAYS TURN THE MAIN BATTERY SWITCH AND ALL MAIN
CIRCUIT BREAKERS OFF WHEN LEAVING THE TRUCK
UNATTENDED.