IQ32 SDR TRANSCEIVER OPERATIONS MANUAL
P a g e
| 11
Non-Volatile Memory
Most configuration and operating parameters are saved in non-volatile memory. As you config-
ure the IQ32 on the varied setting screens, program screen function key operations and key-
board Fn key operations, these settings are preserved for future use. When the power is
turned off and later restored, the value of the many parameters retrieved from memory are the
same as previously defined.
Frequency of operation, mode, filter, AGC, split frequency, Tx Level and frequency increment
step size are saved in the last selected memory location,
Memory 1
–
Memory 14
. These
memory locations are discussed in a later section of this manual.
The offset frequency, typically used for transverter operation, is also saved in this memory.
