IQ32 SDR TRANSCEIVER OPERATIONS MANUAL
P a g e
| 45
Split Operation
The
Split
button is used if you want to operate CW in split mode,
i.e.,
with one frequency for
receive and a different nearby frequency for transmit. This is often done during a pile-up with a
DX station. You listen on the frequency where the DX station is transmitting, but they listen on
a different, announced frequency, such as 1kHz higher in the band.
On the
CW
H
OME
S
CREEN
,
touch the on-screen
Split
button.
The display will change similar to
Figure 60.
Next, set your desired transmit fre-
quency, Figure 61. In this example,
we tuned to 7.031MHz, or 1kHz
higher than the receive frequency.
Once you have set the transmit fre-
quency, touch the button which was
re-labeled as
SetTx
instead of
Split
.
Figure 60: CW Split Operation Setup Screen
Figure 61: CW Split Operation - Transmit Frequency Screen
