Hobby Siesta Instruction Manual Download Page 58

Page: 58 / 229

6. Interior Structure 57

Lock the media unit or TV holder before driving.

The mounted TV may not weigh more than 8 kg. When

driving, we recommend that you remove the TV from the

mount and store it securely.

6.2

TV mount

* (

included in Deluxe package)

230 V power sockets and an aerial socket for the TV and/or
receiver are located directly adjacent to the holder.

Extendable flat screen TV

• To unlock, press the metal rail

and, at the same time,

extend the TV mount.

• To retract the mount, push it back to its original position

until it is noticeably locked into place.

Extendable flat screen

Mount for flat screen TV

•

To unlock, push the metal rail

to the right. The lock will

be released and the TV mount can be folded out.

• To retract the mount, push it back to its original position

until it is noticeably locked into place

TV mount, locked

TV mount, folded out

Summary of Contents for Siesta






































































































































































































































Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands

Hobby Siesta, Instruction Manual

Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands