Hobby Siesta Instruction Manual Download Page 125

Page: 125 / 229

7. Electrical Installations

124

Socket; the middle pin is the sensor.

PCB switches. The switches must all be in the top posi-

tion, i.e. all set to “off”.

Changeover contact, for free disposal.

Contact bridge, fan on/off.

LED blinks to show current charging mode.

Charger connections

All 12V electrical devices are supplied directly by the ancillary
battery. In 230V mains operation, they are charged automatically

by the battery charger.

All of the lamps in the motor home use 12V LED lights.

Only large electrical devices such as the Combi E heating

air-conditioning system, etc., use 230V.

7.4 Electrical system

Assignment of fuses

The fuses for the individual internal electric circuits are loca-

ted in the input module.

In some models, there may be slight deviations in this

assignment.

Only replace defect fuses if you know what caused the

fuse to blow and have fixed this.

Summary of Contents for Siesta






































































































































































































































Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands

Hobby Siesta, Instruction Manual

Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands