Hobby Siesta Instruction Manual Download Page 193

Page: 193 / 229

12. Maintenance and Care

192

12.4 Airing

For a comfortable climate inside the motor home, there must

be sufficient ventilation. This also avoids corrosive damage due

to condensation.

Ensure that there is a sufficient exchange of air to avoid

damages due to the build-up of condensation!

Condensation is caused by

- insufficient volume inside the motor home

-  breathing and perspiration of the passengers
-  bringing in damp clothing
-  operating a gas cooker

12.5 Care

Use only dishwashing liquid or commercial cleaning agents,

always taking care to follow the instructions for use, and

test the cleaning agent to make sure it is suitable.

The following applies for their care:

• Clean plastic parts (e.g. fenders, skirts) with water of up to

60° C and mild household cleansers.

• Clean greasy or oily surfaces with spirits.

Cleaning products not recommended for use

-   abrasive cleaning agents (scratch the surface)
-   cleaning agents that contain acetone
  (immediately damage the plastic)
-   dry cleaning products
-   diluents

Wash the vehicle only in places provided for this purpose.

Using cleaning materials sparingly. Aggressive cleansers,

such as wheel rim cleaners, damage the environment.

Summary of Contents for Siesta






































































































































































































































Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands

Hobby Siesta, Instruction Manual

Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands