Hobby Siesta Instruction Manual Download Page 158

Page: 158 / 229

10. Built-in devices 157

Special features in electric operation

- If the 230V power supply is interrupted and the 12V supply has

been switched on, an error code will be shown on the display.

- As soon as the 230V power supply has been reinstated, the

heating system will automatically be restarted using the
previous settings. The error code will disappear.

Icon

Type of operation

Type of energy

Gas

EL 1

Electricity

EL 2

Electricity

MIX 1

Elect Gas

MIX 2

Elect Gas

Use the adjusting knob / pushbutton to select the icon in the

menu line

- Press to switch to the setting mode.
- Use the adjusting knob / pushbutton to select the desired type of energy

- Press the adjusting knob / pushbutton to confirm the temperature.

Mixed operation (electric and mixed operation are optional

extras)

Selecting the type of energy

As soon as the heating has been switched on (room tempe-

rature and hot water temperature have been activated) the

type of energy selected in the previous heating operation is

displayed in the status line.

Manufacturer's default setting: gas.

Special features in mixed operation

Interrupting the 230V power supply:

The heating system will switch automatically to gas operation.
As soon as the 230V power supply has been reinstated, the he-
ating system will automatically switch back to mixed operation.

Malfunction in the combustion process (e.g. lack of fuel):

Combi Gas The heating system will switch automatically

to electric operation. If it is running in mixed

operation, the cause of the malfunction must

be eliminated. Use the control panel to switch

the heating off and then on again.

Summary of Contents for Siesta






































































































































































































































Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands

Hobby Siesta, Instruction Manual

Search results

Summary of Contents for Siesta

Reviews:

Related manuals for Siesta

Brands by name

Popular brands