PARTS LIST
Before assembly match the parts in the
exploded view of the Diabolo with the
parts in the kit. Check off each part on
the parts list. If any parts are missing or
damaged return the kit to your hobby
dealer.
Check to make sure that all the listed
parts are included in your kit.
1 Fuselage
2 Right Wing
3 Left Wing
4 Wing Center Cover (Plastic)
5 Vertical Fin
6 Rudder
7 Horizontal Stabilizer (Stab.)
8 Cowl
9 Fuel Tank
10 Neoprene Ring
11 Plastic Disc (Small)
12 Plastic Disc (Large)
13 Silicone Tubing
14 Clunk
15 3x18mm Self Tapping Screw
16 Rubber Plug
17 Plastic Collar
Aileron Horn
Control Horns
Snap Clevis
Rod Clevis
Back Plates
18 Fuel Pipe
19 Mounting Plates (Angled)
Mounting Plates (Rectangle)
20 Clevis Retaining Tube
21 Push Rod Exits
22 Stab. Root Cover (Plastic)
23 Wheel
24 Main Gear
25 Wheel Pants
26 Cock Pit
27 Canopy
28 Main Wing Joiner
29 Rear Wing Joiner
30 Front Wing Joiner
31 Rubber Shock Absorber
32 Cowl Brace
33 Aileron Servo Tray Mount
34 Aileron Servo Tray
35 8mm Dowel Rod
36 Wing Bolt Mounting Block
37 Balsa Tank Support
38 Wing Mounting Brace
39 3x12mm Self Tapping Screw
Spinner
Spinner Back Plate
40 Engine Mount
41 Mounting Plates
42 Shrink Tubing
43 Control Rod (Short-Bent)
44 Aileron Control Rods (Short)
45 Throttle Control Rod (Long)
46 Throttle Tube
47 Wood Push Rods
48 Control Rod (Long)
49 Main Servo Tray
50 Stabilizer Supports
51 Plastic Disc
52 Cock Pit Mounts
53 Brass Sleeve
Brass Tube
54 Tail Wheel
55 Spring Steel Strip
56 Tail Gear
57 Tail Control Arm
58 Springs
59 Brass Arms
60 0-Ring
61 Collars
62 Wheel Collar
63 4x40mm Screw
64 4x30mm Screw
65 2x15mm Screws
66 3x8mm Self Tapping Screw
67 3x8mm Screw
68 3x12mm Self-Tapping Screw
69 3x5mm Screw
70 3.5x15mm Screw
3x12mm Screw
71 4x15mm Screw
72 4x20mm Screw
73 4mm Nut
74 2mm Nut
75 3mm Nut
76 4mm Washer
77 3mm Washer
78 2mm Washer
79 Lock Washers
80 4mm Washer
81 4mm Nylon Nut
82 1/8" Plywood Wedge
-3-
