(7) Attach the rods to the servo arm using the rod clevis NOTE You may have to
use a different style servo horn for more throw as shown
(10) Install the three remaining servos into the tray using grommets and screws Be
sure that the servos are positioned correctly Next mount the radio switch
NOTE Make sure that the servo wires all run forward so they are easily
accessible
(8) Connect the aileron servo to the receiver and check the movement of the
ailerons Make sure that both ailerons are neutral when the servo is neutral
Adjust the clevises as needed
(11) We suggest installing an external switch mount so that the radio system can
easily be turned on and off from the outside without taking the wing off (The
Dubro #203 Kwik Switch Mount works well)
(9) Trial fit the servos into the fuselage and trim the tray as needed for a good fit (12) Assemble the rudder and elevator control rods using the parts above
-14-
