Hobbes SURVLtest User Manual Download Page 104

Page: 104 / 107

Page.99.

Notice:

Don’t input any power into the “DC12/3A OUTPUT” port of the tester.

Improper use damage is not within our company’s warranty.

The tester power output capacity is 3A. If the IP camera uses more than 3A, the tester will

automatically enter a protection mode.

Disconnect all cables from the tester and reboot it to resume using the tester.

The SURVLtest power output is close to 3A, if the IP camera’s power is over 3A, the tester will

auto enter protection mode. Disconnect all the connections of the tester and then connect the

tester with power adaptor to resume the tester.

Make sure the tester has been sufficient charged, otherwise tester can’t provide enough output

power.

3.8 USB 5V 2A power output

When the tester is turned on, the DC 12V and DC 5V power output functions are automatically turned

on. If the tester is turned off, the DC 5V USB can still be used to power an external USB device.

NOTE: The USB port is for power only and not data.

Summary of Contents for SURVLtest












































































































Search results

Summary of Contents for SURVLtest

Reviews:

Related manuals for SURVLtest

Brands by name

Popular brands

Hobbes SURVLtest, User Manual

Search results

Summary of Contents for SURVLtest

Reviews:

Related manuals for SURVLtest

Brands by name

Popular brands