Hobbes SURVLtest User Manual Download Page 13

Page: 13 / 107

Page.8.

sourcing equipment are allowed to connect to the tester’s PSE port, and the PoE power will be supplied

to the IP camera by the tester’s LAN port. In this condition, the tester cannot receive data from IP

camera, but the computer connected to the PoE switch can receive the data via the tester.

Warning:

PoE switch or PSE power sourcing equipment can only be connected to tester “PSE

IN” port, otherwise will damage the tester.

3.2.2 Analog camera connection

(1) Connect the camera's video output to the IP tester’s VIDEO IN. The image will display on the tester

after pushing the PTZ icon.

(2) CCTV IP Tester “VIDEO OUT” interface connect to the Video input of monitor and optical video

transmitter and receiver, the image display on the tester and monitor.

(3) Connect the camera or the speed dome RS485 controller cable to the tester RS485 interface, (Note:

positive and negative connection of the cable).

Summary of Contents for SURVLtest












































































































Search results

Summary of Contents for SURVLtest

Reviews:

Related manuals for SURVLtest

Brands by name

Popular brands

Hobbes SURVLtest, User Manual

Search results

Summary of Contents for SURVLtest

Reviews:

Related manuals for SURVLtest

Brands by name

Popular brands