Page.6.
32
USB 5V 2A power output (used only for power, not data)
33
UTP cable port: UTP cable tester port/ Cable tracer port
34
Micro SD card moveable, (comes with 8GB, supports up to 32GB)
35
HDMI output interface
3. Operation
3.1 Installing the Battery
The battery main switch at the right-bottom corner of tester bottom
。
“
0”: Battery power off
“
1”: Battery power on
The tester has built-in lithium ion polymer rechargeable battery, the tester’s power switch on the bottom
should turn to “0” for safety during transportation (the factory default is “0”)
Using the instrument, please turn on the power switch to “l”, then press the several
seconds can turn on/off tester. In general, user no need to turn on battery switch if don’t use the
instrument in long time, please turn off the switch.
Notice: Please use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed
Notice: When the Charge Indicator
turns off, the battery is approximately 90% charged.
The charging time can be extended for about 1 hour and the charging time within 12 hours will not
damage the battery.
Notice:
Press the key several seconds to restore the default settings when the
instrument works abnormally.
