HMS Networks Anybus Communicator ABC3028 User Manual Download Page 73

Page: 73 / 126

Communicator Configuration

71 (124)

7.10

I/O Data Map

On the

I/O data map

page the data communication between the subnetwork (Node) and the

high level network (PLC) is mapped.

For more information about addressing and register mapping, refer to

Addressing and Register

Mapping, p. 84

The allocated I/O area is auto-generated based on how the settings on the

Serial communication

page and the

Nodes and transactions

page are configured.

It is possible to set the I/O area manually, if you want to pro-actively allocate more I/O for future
expansions without re-configuring the PLC. Refer to

To Configure I/O Sizes Manually, p. 67

There are three areas: Data from Modbus TCP, Data to Modbus TCP and General Areas. Refer to

Map Area, p. 74

Anybus

Communicator

™

User Manual

SCM-1202-162 1.1 en-US

Summary of Contents for Anybus Communicator ABC3028































































































































Search results

Summary of Contents for Anybus Communicator ABC3028

Reviews:

Related manuals for Anybus Communicator ABC3028

Brands by name

Popular brands

HMS Networks Anybus Communicator ABC3028, User Manual

Search results

Summary of Contents for Anybus Communicator ABC3028

Reviews:

Related manuals for Anybus Communicator ABC3028

Brands by name

Popular brands