HMS Networks Anybus Communicator ABC3028 User Manual Download Page 113

Page: 113 / 126

111 (124)

11.3.3

Firmware File Validation

Before the firmware file is imported into the system, the firmware upgrade function perform a
validation of the file, to ensure that:

•

the firmware is compatible with the Communicator hardware

•

the firmware is suited for the product

•

that the officially HMS software signatures are valid

•

that the firmware file is not corrupt or damaged

If the firmware file does not pass the validation, the firmware file is rejected and an error
message appear.

11.3.4

Update Firmware

Before You Begin

To eliminate the risk of interference with plant operation, firmware update is only
available when the Communicator is disconnected from the OT networks.

Ensure that the Communicator is disconnected from the OT networks.

Procedure

To update the firmware:

On the Files & firmware page, click

Upload

In the Upload Firmware window, click

Select firmware (.hiff)

In the Open dialog box, browse to and select the firmware file and click

Open

To start the firmware upgrade, click

Update firmware

→

The firmware file is validated and transferred.

Result

→

If the firmware file pass the validation: The firmware is upgraded and then the
Communicator automatically reboots, for the upgrade to take effect.

→

If the firmware file is rejected: An error message appear.

Anybus

Communicator

™

User Manual

SCM-1202-162 1.1 en-US

Summary of Contents for Anybus Communicator ABC3028































































































































Search results

Summary of Contents for Anybus Communicator ABC3028

Reviews:

Related manuals for Anybus Communicator ABC3028

Brands by name

Popular brands

HMS Networks Anybus Communicator ABC3028, User Manual

Search results

Summary of Contents for Anybus Communicator ABC3028

Reviews:

Related manuals for Anybus Communicator ABC3028

Brands by name

Popular brands