106 (124)
Set Up Node and Transactions
1.
Add a node and select it.
2.
In Node settings configure the node with the following settings:
Node settings
Value
Node address
The Barcode Scanner is set up as a node with Node
address 1.
Name
Barcode Scanner
Timeout time
1000 ms (default)
Reconnecting time
1000 ms (default)
Retries
0 (default)
3.
Add one transactions to the Barcode Scanner node and configure it with the following
settings:
The Barcode Scanner contains the following parameters
Transaction name
Transaction template
Read Barcode Data
Read Barcode Data Template
Check the I/O Data Map
The transactions from the Barcode Scanner is mapped as follows in the
I/O data map
page.
Status word and actual speed from My Drive to Modbus TCP
Address
Barcode Scanner Parameter
0-31
The variable data, 31 bytes, are forwarded from the Barcode Scanner to the PLC.
Anybus
®
Communicator
™
User Manual
SCM-1202-162 1.1 en-US
