67 (124)
7.9
High Level Network Settings
Configure the Modbus TCP network settings.
7.9.1
To Use Automatic I/O Sizes
By default, the Communicator is set to use automatic I/O sizes.
The size of the input data,
Data Size to Modbus TCP
, and the output data,
Data Size from
Modbus TCP
, is determined by the subnetwork configuration.
In the Communicator built-in web interface, the
Use Automatic I/O Sizes
checkbox is selected.
7.9.2
To Configure I/O Sizes Manually
1.
Deselect the
Use Automatic I/O Sizes
checkbox.
2.
Enter a value for
Data Size to Modbus TCP
and a value for
Data Size from Modbus TCP
.
Anybus
®
Communicator
™
User Manual
SCM-1202-162 1.1 en-US
