HME 6700HD, Installation Instructions Manual

Page: 43 / 68

SY
S6700 BRIDGE INTERF
A
CE
36
6.5 Bridge Status
6.5.1 Current Status
Serial Number
The serial number of the Bridge is displayed. It should match the bar code displayed on the
Bridge.
Firmware Version
The current Firmware version of the Bridge.
Settings Version
The current Settings version of the Bridge is displayed.
OS Version
The current OS version of the Bridge.
6.5.2 Network Configuration
DHCP
It displays whether the bridge is or isn’t currently configured in DHCP.
NOTE:
DHCP is not normally used. Do not enable without direction from HME technical support.
IP Address
Displays the Bridge’s current IP address.
Subnet
Displays the Bridge’s current Subnet address.
Gateway
Displays the Bridge’s current Gateway address.
DNS1
Displays the Bridge’s current DNS1 address.
DNS2
Displays the Bridge’s current DNS2 address.
MAC
Displays the Bridge’s programmed MAC Address.
Link
A “check mark” indicates the Bridge is currently connected to a network, and a “dash” indicates
the Bridge does not have a network connection.
Sections
1 2 3 4 5 6 7 8 9 10 11 12