HME 6700HD, Installation Instructions Manual

Page: 38 / 68

EQUIPMENT INST
ALLA
TION
31
12. Click on
Store Settings
, set the correct Date/Time and then “
power cycle
” the Bridge.
13. Excess in Queue alert tones are sounded in the ceiling speaker if too many customers are in
queue and more order takers are needed. Click EDIT to access the Excess in Queue settings.
Use the pull-down to select a number. The range is 1 to 20. Click SAVE . The default and most
commonly used setting for Excess in Queue is "1".
14. Click
EDIT
to access the
Repeat Interval
settings. Use the pull-down to select a Repeat Interval
number (in seconds). The range is 1 to 60 seconds. Click
SAVE
.
NOTE:
To turn alert tones off, set Excess-in-Queue to “0.” Excess-in-Queue alert tones must be
set from 1 second minimum to 60 second maximum repeat intervals.
15. Visually confirm that the 6700HD Bridge Status LEDs and network LEDs are lit by checking
the 6700HD Bridge LED status. To verify that the Bridge LEDs display Normal Function:
● The
Network
LED should be blinking.
● The
Device
LED should be steady on (the bases have
been located).
● The Command LED should be Off or temporarily On.
● The
Status
LED should be Off.
16. Test the system to verify proper functionality.
Sections
1 2 3 4 5 6 7 8 9 10 11 12