HKS GT SUPERCHARGER SYSTEM /LS460
- 13 -
○
Disconnect the cables from the battery.
○
Remove the battery.
○
Remove the air cleaner box and air duct.
○
Remove the mounting bolts of both sides’ the air
cleaner box. Keep the removed bolts for later use.
○
Remove two stud bolts from the left bank.
○
Remove the skid control computer assembly.
○
Replace the spark plugs with new ones. Spark plugs are
not included in this kit.
※
When replacing the plugs for the 1st, 2nd, 3rd, and 4th
cylinder, insert a flat head screwdriver into a notch, and
remove the spark plug tube gasket and ignition coil
together. Wrap a protection tape around the screwdriver
as shown in the diagram on the right.
※
Make sure not to scratch the cylinder head when removing
the spark plug tube gasket.
