HKS GT SUPERCHARGER SYSTEM /LS460
- 27 -
○
Cut the provided Mesh 16mm to 330mm and 210mm in length.
・
Cover the cut portion with masking tape to prevent
ravel as shown in the diagram on the right.
・
Lightly apply tension to the mesh and mark the
position to cut to 330mm and 210mm in length.
・
Cut the hose to 330mm and 210mm in length.
○
Cover a hose with the provided Mesh, and secure it with Tie Wraps.
・
Pinch the one end of the Mesh, push the end inward, and interfold the end of the Mesh as
shown in the diagrams below.
・
Repeat the same procedure to the other end.
・
Push and shrink the Mesh in a longitudinal direction to
expand the diameter.
・
Insert the 16mm Hose into the Mesh.
・
Make sure the hose is properly fit in the Mesh.
・
Mesh 16mm
