HKS GT SUPERCHARGER SYSTEM /LS460
- 20 -
○
Install the Water Inlet Adapter.
Secure the harnesses from the relay box to
the bracket with Tie Wrap.
Install the P/S computer harness ground using
Cap Bolts M6 L=15 x 2, Washers M6 x 2, and
Flange Nut M6.
※
Place the ground in the direction shown in
the diagram above to prevent the ground
tip from unnecessary contact with the
vehicle body.
※
Make sure there is no
excessive tension
on the ECT harness. Remove the
harness clamp to release tension if
necessary.
・
Water Inlet Adapter
・
O-Ring
・
Factory Bolt M8 x 3
Install the O-ring.
Insert the harness between the VTC unit and
Adapter using the 3 factory M8 bolts.
Tightening Torque N
･
m
（
kgf
･
m
）
T=21(2.14)
