1. General Description
1.1.
Basic information
This Assembly Manual constitutes the integral part of device. Before use firstly the user shall read carefully this
manual. Any use and operation not consistent with provisions of this Manual shall void the guarantee.
Before connection firstly flushing and cleaning of heating circuit is required.
No obstruction is allowed within air inlet and outlet area.
During device operation water supply is required. Do not operate the device if piping
has not been supplied with water and bled.
Regular checks of device are recommended (regarding dirt, deposits and scale). Before
cleaning firstly turn off power supply.
Before any works on wiring, firstly ALWAYS turn off power supply. Always
protect electric components before contact with water.
Always adhere strictly to wiring parameters and cable size indicated in data sheet of
each heat pump.
Note that connection to power supply shall ensure correct phase sequence.
Failure to follow the requirements regarding wiring may result in heat pump
damages not covered with guarantee.
Never clean the machine with products containing acids, chlorine, sand or soda.
Works on devices hall be delivered by authorized service only
1.2.
CE symbol and legal requirements
Heat pump carries CE symbol. Manufacturer declares that the manufactured device complies with the requirements
laid down in electromagnetic compatibility directive (89/3 36/EEC) and comply with the basic requirements laid
down in Low Voltage Directive (73/23/EEC). The device complies also with the requirements laid down in EN
14511, EN 14825 and EN 12102 Standard
1.3.
Safety notes and precautions
Heat pump has been designed and manufactured using available technology pursuant to applicable safety
requirements. The device shall not be operated by any unauthorized persons not possessing experience or
knowledge regarding operation of device. Any use contrary to intended purpose or misuse may result in
machine damage. A supplier is not liable for any damages caused by misuse or any use contrary to intended
purpose. The purpose of device is to provide source of heat for closed central heating systems.
Heat pump is purposed for operation outside the building only. Installation inside the
building is not allowed.
Ambient temperature range -25
°
C to 35
°
C.
Operation Manual and Guarantee Card v.010
HKS LAZAR Sp.z o.o. ul. Wodzisławska 15B 44-335 Jastrzębie-Zdrój
page.
3
