33
C07UE001-1804
5-1-1
Disassemble Cover
Step 01. Turn off the power on the control panel.
Step 02. Remove the external M4 and M3 screws.
Step 03. Disassemble the robot cover from down to up.
Step 04. Keep the screws well to avoid missing or damage.
Figure 5-2 Illustration of Dissembling Cover for Robot
Don’t force to disassemble the cover. Otherwise, it could
cause poor cable contact or damage as well as electric
shock or robot failure.
Don’t remove the cable sleeve when you disassemble the
cover, and avoid excessively pulling it so that the circuit
drops or breaks to cause the robot failure.
Don’t continuously apply force and heavily press/push to
the cover protrusion. Otherwise, it could break or
damage.
4-M3 flat washer
4-M4 flat washer
