Hitachi ZX27U-2, Operator'S Manual

Page: 39 / 230

SAFETY
S-29
PRECAUTIONS FOR WELDING AND GRIND-
ING
•
Welding may generate gas and/or small fires.
•
Be sure to perform welding in a well ventilated and
prepared area. Store flammable objects in a safe
place before starting welding.
•
Only qualified personnel should perform welding.
Never allow an unqualified person to perform welding.
•
Grinding on the machine may create a fire hazard. Store
flammable objects in a safe place before starting grind-
ing.
•
After finishing welding and grinding, recheck that there
are no abnormalities such as the area surrounding the
welded area still smoldering.
SA-818
AVOID HEATING NEAR PRESSURIZED FLUID
LINES
•
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to
yourself and bystanders.
•
Do not heat by welding, soldering, or using a torch
near pressurized fluid lines or other flammable
materials.
•
Pressurized lines can be accidentally cut when heat
goes beyond the immediate flame area. Install
temporary fire resistant guards to protect hoses or
other materials before engaging in welding, soldering,
etc.
SA-030
AVOID APPLYING HEAT TO LINES
CONTAINING FLAMMABLE FLUIDS
•
Do not weld or flame cut pipes or tubes that contain
flammable fluids.
•
Remove flammable fluids thoroughly with
nonflammable solvent before welding or flame cutting
pipes or tubes that contained flammable fluids.