5-4
OPERATING THE MACHINE
Control Lever Lock
d
WARNING:
Be sure to press lock ( ) side of control lever lock
switch (1).
Before leaving the operator's seat, be sure to stop
the engine. Then, set control lever lock switch (1) to
the lock ( ) position.
Always check to be sure that the control lever
lock switch is set in the lock ( ) position before
transporting the machine or leaving the machine
at the end of the shift.
Control lever lock switch (1) is provided to prevent
unexpected machine operation if the operator were to
mistakenly come in contact with the bucket and/or lift arm
control lever when getting on or off the machine. When
control lever lock (1) is placed in unlock ( ) position, the
control lever becomes operable.
Control Lever Lock Operation
When leaving the operator's seat:
1. Park the machine on solid level ground. Lower the
bucket to the ground. Return all levers to neutral. Set
the parking brake. Stop the engine.
2. Press lock ( ) side of control lever lock switch (1).
Before starting operation:
Before starting operation, check that control lever lock
switch (1) is in the unlock ( ) position.
MNEC-07-001
Unlock
Lock
1
MNEC-01-015
Summary of Contents for ZW 180-6
