Hitachi ZW 180-6, Operator'S Manual

Page: 230 / 426

4-12
MOVING THE MACHINE
Precautions for Traveling
When operating, observe the previously noted operating
precautions along with the others shown below to ensure
safe and correct operation.
d
WARNING:

In case a tire is punctured while driving, securely
hold the steering wheel and slowly reduce the
drive speed.
If the service brake is suddenly applied while
a tire is punctured, steering may lose control,
possibly creating an accident. Never apply the
brake quickly if a tire is punctured.

Never mount or dismount a moving machine.
Never allow any personnel other than the
operator to ride on the machine when operating.

Even after break-in is complete, avoid running the
engine at high RPM’s (min
-1
) under no load.

If any abnormal condition such as an abnormal
noise, vibration, or smell is noticed while operating,
immediately stop the engine and inspect the machine
for any trouble.

Avoid using sudden steering or braking as much as
possible because your machine and other machines
may become involved in a hazardous condition.

Road speeds of this machine are lower than most
automobiles. Always give the right of way to
automobiles.

Make it a habit to periodically scan the gauges
and instruments. If any abnormality is recognized,
immediately stop the machine and check the machine
for the cause of the trouble.

When required to drive on the road shoulder or in
tight spaces, use a signal person or signal car.

Slowly approach a crossing while paying attention to
the visibility ahead and in the opposite lane.