manualshive.com logo in svg

Hitachi ZW 180-6, Operator'S Manual

The Hitachi ZW 180-6 Operator's Manual is an essential resource for anyone operating this powerful machine. With detailed instructions and safety guidelines, this manual ensures smooth and efficient operation. Download your free copy today from manualshive.com, and unlock the full potential of this incredible product.

Share
Download
background image

4-2

MOVING THE MACHINE

Starting to Move

d

WARNING:  Start to move the machine only after 

checking that no personnel and/or obstacles are 

present around the machine.

 

Never turn ride control switch (4) (option) to ON 

position when traveling the machine or raising 

the bucket. Before turning the ride control switch 

(4) ON, stop the machine and confirm that no 

one is around the bucket. Avoid turning ride 

control switch (4) to ON position while moving the 

machine. Failure to do so may automatically move  

the lift arm up or down.

f

NOTE:  Refer to page 1-105 for detailed information of 

ride control switch (4).

1.  Check that none of the warning indicators except 

parking brake indicator (1) on the monitor panel are 

ON when engine is running.

2.  Set the front attachment in the driving position by 

operating control levers (2) (3).

3.  Turn neutral lever lock (5) to the unlock ( ) position.

MNEC-07-001

4

3

2

MNEC-01-037

5

1

MNEK-01-500

MPD8-04-002

A Driving Position

A: 300 mm

Summary of Contents for ZW 180-6











































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZW 180-6

Kubota R540 Operator'S Manual preview
R540
Brand: Kubota Pages: 146

Brands by name

Popular brands

Load more brands