![background image](http://html.mh-extra.com/html/hitachi/zw-120-6/zw-120-6_operators-manual_141697345.webp)
10-1
STORAGE
If the machine is to be stored for more than one month, observe the following precautions so that its function will not be
impaired during storage.
PRECAUTION ITEMS FOR LONG-TIME STORAGE
Item
Contents of Work
Wash Machine
Sufficiently wash the machine to remove stuck mud and/or dust.
Supply Oil and
Grease
Check for low level/contamination of lubricating oil. Refill or change as necessary. Supply grease to
greased parts.
Apply a thin coat of oil to parts susceptible to rust.
(i.e. cylinder rods etc.)
Fill up fuel to prevent rust in the fuel tank.
Battery
Remove and fully recharge the battery, then store it.
Turn the battery disconnect switch to the OFF position.
Coolant
Supply a rust preventive agent without fail. If there is a possibility of freezing, also supply an
antifreeze solution or fully drain the coolant. In this case, be sure to attach a "No Water in Radiator"
sign in the operator's cab.
If long-life coolant is used, the above measures are not necessary.
Thoroughly wash the radiator by water and then dry it.
DEF/AdBlue®
DEF/AdBlue® may become ammonia when storing it under 40 °C (104 °F) for one month or longer.
Change DEF/AdBlue® if ammonia odor is observed when opening the tank cap. Do not inhale fumes
directly from the water supply outlet or breather.
Prevention
of Dust and
Moisture
Store the machine in a relatively dry garage and cover it.
Tools
Inspect and repair, then store.
Lubrication
Operation No-
load Operation at
a Slow Speed for
Several Minutes
If the oil films of the parts are broken and parts are rusted, they will be worn abnormally when
operated the next time. To prevent this, operate the machine at least once a month to lubricate the
parts.
At this time, check the coolant and lubrication oil levels. Charge the batteries.
Storing the Machine
d
WARNING: In case lubrication operation is
unavoidably performed indoors, open windows and
doors to maintain good air ventilation to prevent
asphyxiation. Lubricant property will deteriorate
even if the machine is kept stored. Check all lubricants
before operating the machine after being stored.
Apply the parking brake while storing.
IMPORTANT: If the machine is operated without
performing lubrication operation, damage to hydraulic
equipment may result due to insufficient lubrication.
f
NOTE: Lubrication operation means that a series of
operations such as drive, and loader front operation are
repeated a few times after performing warm-up.
Before operating the loader front attachment and steering
wheel, remove rust-prevention oil coated on the hydraulic
cylinder rods.
Summary of Contents for ZW 120-6
