E-18
Cleaning the fi lters
Clean fi lter
1
Open the clean fi lter.
Set the dust case on the
fl oor.
Dust case
Grab and hold the lower part of the dust case, lift up the knobs of the
clean fi lter, and open the cover in the direction indicated by the arrow.
Clean filter
Knobs
2
Remove dust and debris from the clean fi lter
Detach the clean fi lter.
Clean filter
Detach
Wash the sponge filter
with water if there is dirt
on the filter.
Note
Sponge
filter
(P.E-21)
Be sure to attach the sponge
filter after emptying the dust
case or cleaning the filters.
Remove attached dust and debris
by using the maintenance brush.
Maintenance brush
When removing dust and debris, do not slap the clean fi lter
onto the fl oor, etc. Failure to do so might cause damage.
To clean the clean fi lter, use the maintenance brush that
was provided with the vacuum cleaner.
Note
Perform maintenance (wash with water) when you are concerned about dirt or the
suction power is weak.
(P.E-21)
3
Attach the clean fi lter.
Attach the clean fi lter in the reverse order of
removal.
Clean filter
Attach
4
Close the clean fi lter.
Press fi rmly until you hear a "click" sound.
Make sure the sponge fi lter
is attached.
Note
Click
Clean filter
Emptying the dust case and cleaning the fi lters
(continued)
PV-XL300J_EN.indd 18
PV-XL300J_EN.indd 18
2021/9/22 11:11:04
2021/9/22 11:11:04
