Cleaning the power head
T
roubleshooting
E-25
Go to
1
Go to
2
Go to
3
Go to
3
Go to
4
Go to
5
The rotary brush of the power head stops.
The safeguard is released after 5 to 60 minutes,
and you can use the cleaner as usual.
Safeguar
d and cause
Instructions
The safeguard might be operating. Release the safeguard with the following instructions.
The vacuum cleaner does not operate, or stops while the vacuum cleaner is running. The suction power is weak. The rotary brush does not rotate.
(P.E-23, E-24)
(P.E-16 to E-22)
1
2
3
4
5
Press the button of the vacuum cleaner to stop operation.
To prevent the vacuum motor or the battery from overheating,
the vacuum cleaner might sometimes automatically enter safe
mode, in which the vacuum cleaner runs with less electricity
and reduced suction power.
If the vacuum cleaner is continuously operated in a state
where there is a lot of resistance to the rotary brush, the
rotation of the rotary brush stops automatically to prevent
the motor from overheating.
The battery indicator is
blinking slowly (about
once every 4 seconds).
The filter indicator is
blinking (about once
per second).
Dust clogged
in clean filter
or sponge
filter
Operation
while
blocking
the inlet
The battery
is hot.
The vacuum
cleaner
motor is hot.
Foreign
matter stuck
Power head
pressed against
floor or carpet
Empty the dust
case or maintain
the dust case or
filters.
Remove the
object that is
blocking the
inlet.
Let the vacuum
cleaner cool down.
(It might take some
time before the
vacuum cleaner
cools down.)
Remove the
foreign
substance from
the rotary brush.
Do not press the
power head
against the floor
or carpet.
Suction power of the vacuum cleaner becomes
weak or stops while the vacuum cleaner is running.
Troubleshooting
Before requesting for repair
Check the following points again.
PV-XL300J_EN.indd 25
PV-XL300J_EN.indd 25
2021/9/22 11:11:05
2021/9/22 11:11:05
