background image

E-6

Safety precautions 

(Continued)

CAUTION

Outlet, plug, charging station

 When unplugging the plug from the outlet, hold 
and pull the end of the plug, not the cord

Holding and pulling the plug by the cord might 
damage the cord or cause a short circuit, 
which might result in an electric shock or fire.

Do not use the vacuum cleaner while the cord is wound around the 
charging station

A damaged cord might cause an electric shock or fire.

Disconnect the plug from the outlet when not using it for a long period of time.

Failure to do so might cause the insulation to deteriorate, which might 
result in an electric shock, short circuit, or fire.

Power head (inlet)

Do not let the vacuum cleaner run for an extended period of time with the inlet blocked.

Failure to heed this warning might cause overheating, leading to fire or the deformation of the vacuum cleaner and power head.

 Before performing maintenance on the vacuum cleaner, remove the power head from the vacuum cleaner.

Failure to heed this warning might cause injury.

 Do not attach the parts of this vacuum cleaner to other products, or attach 

the power head of other products to this vacuum cleaner.

Failure to heed this warning might cause overheating, leading to fire or the defor-

mation of the vacuum cleaner or the power head.

 Do not clean using the tip of the extension pipe, and do not insert pins or 

other items in the area joining the vacuum cleaner to the extension pipe.

Failure to heed this warning might cause short-circuiting, resulting in electric shock, 

fire, or damage to the vacuum cleaner or to the floor.

Do not move the power head left and right while they are facing forward.

Failure to heed this warning might cause damage to the floor.

Do not use with foreign objects attached, such as sand or pebbles.

Failure to heed this warning might cause damage to the floor.

Do not use the vacuum cleaner under or in between blankets.

Failure to heed this warning might cause overheating, leading to fire or the deformation.

Do not block.

Exhaust port

Do not block the exhaust port. 

Failure to heed this warning might cause overheating, leading to fire or the deformation of the vacuum cleaner.

Do not expose your body to the air released from the exhaust port for long period of time.

Failure to heed this warning might cause minor burn.

Do not expose your body 

to the Exhaust port for a 

long period of time.

Handle, others

When carrying the stick cleaner, do not hold 

the handy cleaner handle. 

The stick cleaner might fall and cause injury or 

damage the floor.

Do not hold the area around the mounting section of the stick 

cleaner handle when attaching the stick cleaner handle.

Failure to heed this warning might cause injury.

Keep away from fire.

Failure to heed this warning might cause short-circuiting 

due to vacuum cleaner deformation, resulting in fire.

If the vacuum cleaner is used near a flame, exhaust from the vac-

uum cleaner might cause the flame to grow into a conflagration.

Do not prop up the stick cleaner while it is operating.

Do not prop up the stick cleaner against a wall and 

do not leave it unattended while it is propped up.

Do not prop up the stick cleaner while the 

handy cleaner is detached.

Set the vacuum cleaner on the charging station when storing.

Be sure to attach the power head when setting 

the vacuum cleaner on the charging station.

Do not place the charging station on an unstable location.

Failure to heed this warning might cause the vacuum cleaner to top-

ple and be damaged, damage the floor surface, or cause an injury.

When performing maintenance on the vac-

uum cleaner, do not operate it.

Failure to heed this warning might cause injury.

Do not carry the vacuum cleaner while it is 

set on the charging station.

The stick cleaner might fall and cause injury or 

damage the floor.

Do not clean using the handy cleaner with-

out attaching the handy brush.

Failure to heed this warning might cause dam-

age floor surface.

Do not put the charging station in a humid 

location or where dew might form.

Failure to heed this warning might cause floor 

discoloration.

Do not drop the vacuum cleaner, power 

head, charging station, or attachment ac-

cessories elevated locations.

Failure to heed this warning might cause injury 

or damage to the floor or a dropped part.

Do not look directly at the LED light.

Failure to heed this warning might cause dam-

age to your eyes.

Summary of Contents for PV-X200K

































Reviews: