Emptying the dust case and cleaning the filters
E-17
Cleaning the filters
Clean filter
1
Open the clean filter.
Place the dust case on the
floor.
Grab and hold the lower part of the dust case, lift up the knobs
of the clean filter, and open the cover in the direction indicated
by the arrow.
2
Remove dust from the clean filter
Detach the clean filter.
Clean filter
Detach
Wash the sponge filter
with water if there is dirt
on the filter.
(P.E-20)
Be sure to attach the
sponge filter after
emptying the dust case
or cleaning the filters.
Note
Sponge
filter
Remove attached dust and debris
by using the maintenance brush.
Maintenance brush
When removing dust and debris, do not slap the clean filter
onto the floor, etc. Failure to do so might cause damage.
To clean the clean filter, use the maintenance brush that
was provided with the vacuum cleaner.
Note
Perform maintenance (wash with water) when you are concerned about dirt or the
suction power is weak.
(P.E-19)
3
Attach the clean filter.
Attach the clean filter in the reverse order of
removal.
Clean filter
Attach it
4
Close the clean filter.
Press firmly until you hear a “click” sound.
Click
Clean
filter
Make sure that the sponge
filter is attached.
Note
Sponge filter
Clean filter
Lug
Dust case
Summary of Contents for PV-X200K
Page 31: ...E 31 Replacement parts Specifications ...
Page 32: ...E 32 ...
