2-10
●
Shutdown
2.2 Shutdown
●
Complete the ink stop process by performing the following steps. If you turn OFF the
power without performing the ink stop process, the operation management information
(ink operating time and print count) and count update will not be stored into memory.
When the count function is in use, it is necessary to set the count update (initial value)
again at the time of power ON.
Press the Shut down key.
The confirmation screen then opens.
1
Press the OK key.
●
Wait until the status changes from "Stopping" to "Stop."
2
Remove the print head cover and clean the print head.
●
Perform cleaning by pouring the makeup ink over the area to be cleaned.
Pour the makeup ink over the orifice plate, charge electrode, deflection
electrodes,gutter, and mounting base to clean them (you should also refer to
Section 1.2.3,Print head cleaning).
3
Orifice plate
Charge electrode
Deflection
electrode
Gutter
Mounting base
Area to be cleaned
Cleaning bottle
Beaker
*1. With wiping paper, thoroughly wipe the makeup ink away from the parts
(mounting base included) surfaces and allow them to dry.
*2. The "nozzle rubber seal" is effective in assuring orifice plate dryness and
preventing dust buildup. For increased smoothness in later printer startup,
it is recommended that you install the "nozzle rubber seal" between the
orifice plate and charge electrode while the printer is inactive.
(Refer to the next page.)
Entering a stop signal
will execute the same
action.
(See Section 1.5.3-5,
"Printing stop signal.)
While the stop process
is being performed, the
IJ printer internally
performs the following
operations.
Shuts off the
highvoltage supply.
Stops ink ejection
and switches to
makeup ink ejec-
tion.
Cleans the nozzle,
gutter, and
recovery path.
Stops makeup ink
ejection and
relieves the circula-
tion path internal
pressure.
1
2
3
4
Shutdown Process Confirmation
Shutdown will stop the ink jet.
Solution To stop the ink jet, press [OK].
OK
Cancel
Process : Stopping ink
Status:Stopping
Print description
Status:Stop
《
》
Start
up
Summary of Contents for PH
Page 288: ...2 K5253 1 ...
