7-41
●
Draining the Ink from the Main Ink Tank
7.16 Draining the Ink from the Main Ink Tank
●
If the main ink tank too full fault occurs, the touch panel keys become inoperative.
Remove the main ink tank drain tube as shown below to drain the ink in the tank by
approximately 50cc. After that, return it to its original position.
●
Before replacing the JP-Y37, JP-Y91, JP-Y94 ink (or 6 months after the ink is
replenished), perform this operation and make sure that the ink can be drained. If the
ink cannot be drained, execute the long-term shutdown process, referring to "7.15
Long-term Shutdown", to remove any accumulated sediment. If the sediment cannot
be removed, replace the main ink tank: When replacing the main ink tank, contact
your local distributor.
Clamp
Stop plug
Drain tube
Drain tube
Beaker
●
After the plug is returned to its original position upon completion of ink drainage,
perform ink recharging as directed in Section 7.5, Ink replacement .
If you start operation without refilling the ink, a "Replenishment Time-out" fault will
occur. When this happens, cancel the error using the Clear key and then turn on
the "Ink Refill".
If ink is accidentally spilt, wipe it up promptly with wiping paper or
something similar.
In addition, do not close the maintenance cover until you are sure
that the wiped portion has completely dried.
CAUTION
Summary of Contents for PH
Page 288: ...2 K5253 1 ...
