Hitachi PC-ARFG1-A Operation Manual Download Page 55

Page: 55 / 56

9. In Alarm Condition

A11766820A

9. In Alarm Condition

•

The RUN indicator flashes.

•

The indoor unit number, alarm code, model code, and the connected number of indoor units are displayed on

the screen.

•

If two or more indoor units are connected, the above functions for each indoor unit are displayed one-by-one.

9.1 Power Failure

•

All the indicators are OFF.

•

Once the air conditioner is stopped by power failure for longer than 2 seconds, the air conditioner is not

started again, although power recovers. Perform the starting procedures again.

•

If the power recovers within 2 seconds, the air conditioner starts again automatically.

9.2 Electromagnetic Interference (EMI)

•

There could be an instance where all the indications are OFF and the unit is stopped.

•

This can occur through activation of the microcomputer for the air conditioner protection from the

Electromagnetic Interference (EMI).

•

Perform the starting procedures again.

When more than one indoor unit is connected,

press " " or " " to show other indoor units.

Indoor unit number

(Refrigerant system-address number)

Installed unit number

01-02

Alarm Code:

Alarm Reset

Address

MODEL :

IDU :

ODU :

F .08

TIC4024B21S

TVWHR096B32S

Summary of Contents for PC-ARFG1-A

























































Search results

Summary of Contents for PC-ARFG1-A

Reviews:

Related manuals for PC-ARFG1-A

Brands by name

Popular brands

Hitachi PC-ARFG1-A, Operation Manual

Search results

Summary of Contents for PC-ARFG1-A

Reviews:

Related manuals for PC-ARFG1-A

Brands by name

Popular brands