manualshive.com logo in svg

Hitachi PC-ARFG1-A, Operation Manual, Page: 40 / 56

Share
Download
Hitachi PC-ARFG1-A Operation Manual Download Page 40

5. Function Menu Screen Display

38

 A11766820A

5.12.4 Display in FrostWash

If the indoor or outdoor temperature does not 

meet the conditions for FrostWash, the following 

is displayed.

If FrostWash is paused, the following is displayed.

①

- 1 When the indoor unit is out of the 

temperature range

①

- 2 When the outdoor unit is out of the 

temperature range

①②

- 1 Press "OK" (Turn off the FrostWash)

①②

- 2 FrostWash off screen

The above display will continue for about 8 

minutes. Please note that no operation can be 

done at that time. 

If the room temperature is outside the range of 

59

o

F to 86

o

F(15°C to 30°C), FrostWash will not be 

performed and paused is displayed. The display 

will disappear when one of the remote controllers 

is operated after the backlight is turned on.

If the room temperature is outside the range of 

34

o

F to 110

o

F(1°C to 43°C), FrostWash will not be 

performed and paused is displayed. The display 

will disappear when one of the remote controllers 

is operated after the backlight is turned on.

The display of completed FrostWash will 

disappear when one of the remote controllers is 

operated after the backlight is turned on.

①

FrostWash in preparation

②

FrostWash in progress

③

Complete FrostWash

FrostWash is Starting...

During FrostWash, a freezing sound and fog may 

occur , this is a normal occurrence.  

Press OK to Stop the FrostWash operation.  

OK

Stop FrostWash Operation

FrostWash in Progress...

During FrostWash, a freezing sound and fog may 

occur , this is a normal occurrence.  

Press OK to Stop the FrostWash operation.  

OK

Stop FrostWash Operation

26

.

0

Temp

OFF

IU temp. over range

 

FrostWash stops

26

.

0

Temp

OFF

OU temp. over range

 

FrostWash stops

Back

Frost Wash

Frost Wash Available Timing

Frost Wash Intervals

Auto Clearning Start/Disable

Start Frost Wash

Frost Wash History

Main RCS cannot be detected. 

Press  OK  to set this as Main RCS.

OK

Turn OFF  the FrostWash Now?

Yes

Cancel

OK

OK

 

Select

Back

OK

FrostWash has stopped.  

Before cancelling a process, please wait about 8 

minutes.

Please Wait....

In FrostWash, the following is usually displayed 

in order.

NOTE:

• 

In each screen display, the backlight turns 

off after a certain period of time (The default 

setting is 15 seconds.) after operation, so it 

may be difficult to see the screen display.

26

.

0

Temp

OFF

 FrostWash is complete

2

6 

C

Conference Room

Summary of Contents for PC-ARFG1-A

























































Reviews:

No comments