Hitachi PC-ARFG1-A Operation Manual Download Page 44

Page: 44 / 56

5. Function Menu Screen Display

A11766820A

5.14 Louver Open/Close

This function is used to fully open louver for adjusting the horizontal (left or right) direction of the air flow.

NOTES:

•

This function cannot be set when the air conditioner is ON.

•

This function is invalid depending on the indoor unit type. Refer to the user manual of indoor unit for details.

5.15 Ventilation

Operation Mode

Action

A/C

Operate the air conditioner individually.

Ventilation

Operate the EconoFresh individually.

A/C + Ventilation

Operate the air conditioner and the total heat exchanger together.

NOTE:

•

A/C + Ventilation function is available only when the total heat exchanger is connected.

1. Ventilation

Step1. Select "Ventilation" on the "Function Menu" and

press "OK".

Step2. Press " " or " " to select the operation mode and

press "OK" to confirm. The item changes as follows:

"A/C"

↔

"Ventilation"

↔

"A/C + Ventilation".

Press" " to return to Function Menu.

1. Louver Open/Close

Step1. Select "Louver Open/Close" on the "Function Menu" and press

"OK".

Step2. Press " " or " " to select "Yes" and press "OK" to open/close air

outlet of indoor units.

Function Menu

Total Heat Exchanger SET

Ventilation

Louver Open/Close

Select

Back

(Mon) 16:30

Humidity Setting

Function Menu

Humidity Setting

Total Heat Exchanger SET

Ventilation

Louver Open/Close

Select

Back

(Mon) 16:30

Yes

Cancel

Open louver?

Function Menu

Total Heat Exchanger SET

Ventilation

Louver Open/Close

Select

Back

(Mon) 16:30

Humidity Setting

Ventilation

Ventilation
A/C + Ventilation

A/C

Select

Back

Summary of Contents for PC-ARFG1-A

























































Search results

Summary of Contents for PC-ARFG1-A

Reviews:

Related manuals for PC-ARFG1-A

Brands by name

Popular brands

Hitachi PC-ARFG1-A, Operation Manual

Search results

Summary of Contents for PC-ARFG1-A

Reviews:

Related manuals for PC-ARFG1-A

Brands by name

Popular brands