Hitachi Microlok II, Installation, Operation And Troubleshooting Manual

Page: 30 / 52

Microlok II
®
Serial-to-Ethernet Converter (SEC)
Copyright 2019 SM6800O Rev. 1, March 2019 3-16
Figure 3-17 - Back Button in Web Browser on FLASH0/Directory Page
9. Reset the SEC by clicking on the Reboot Digi button (
X
Figure 3-18
X
.) (Digi is the name of
the electronic device in the SEC which stores the configuration files and includes the
Ethernet connection, the Digi EPROM chip, and two LED indicators as shown in
X
Figure
3-19
X
.)
Figure 3-18 - Advanced Tools Page
10. The green LED on the Ethernet connection on the front of the SEC will come on while it is
booting. When it has booted up, the green LED will go out, and the yellow Ethernet LED
will turn off for a brief moment. A few seconds after the yellow LED comes on again, the
SEC is fully running.